Answers
1. What is ClipsLed?
ClipsLed is a recently innovated and patent pending product by ClipsShop. This product is wireless, power built in, snap fastened flashing led that supports the process of capturing everybody’s attention without exception.
Click for ClipsLed demonstration
2. Which makes different Clipsled from the flashing Lights?
- No need to use cable for energy.
- Reusable at different times on different materials.
- Attached with snap fasteners.
3. How long does it last with existing batteries?
With continuous use, the red LED battery will last up to 21 days and the white LED battery will last up to 12 days. The LED can last up to 50,000 hours which is approximately 6 years of 24 hour per day usage.
4. Can Batteries be replaced?
Yes, you can change it yourself in only 5 seconds without any special operation. The battery used is one of the standard sizes.
Click for how to install batteries demonstration
5. Can ClipsLeds be turned off while not in use to save batteries?
Switch-off option available in order to lengthen the battery’s life.
Click for switch on/off option demonstration
6. How a ClipsLed can be set?
By changing the dies of one of the ClipsShop’s grommet machines, snaps can be easily attached on to the surface. Later on, mounting the ClipsLed on the snap is just a very simple operation. To get more information about the machines and dies, visit
http://www.clipsshop.com/products
Click for how to install demonstrations
7. Which are the best application environments?
In order to catch more attention and increase the eye catching affect of ClipsLed, we recommend using it on not too bright places and keeping them away from the direct sun shine or spot lights.
8. How solid is the attachment of the ClipsLed with the snap?
It will certainly stay fixed unless it is taken off by hand or receive a strike, resistant against the moderate wind. Applications on moving materials are even always possible.
Click for very strong fixing demonstration
9. Is ClipsLed suitable for Outdoor Applications as well?
Yes, it is strongly fastened with snaps and it is dust and waterproof. IP 65
10. How a ClipsLed can be standing on very elastic surfaces like soft fabrics?
Support disc to be fixed between the surface and the snap will hold the ClipsLed very solid. To get more information please refer to the accessories page.
Click for support disc demonstrations
11. How a ClipsLed can be mounted on or taken off very elastic surfaces like textile?
Handling Tool will help to mount and take off the ClipsLed from the snaps where it is not possible to support the back part to hold . To get more information please refer to the accessories page.
Click for how to use handling tool demonstration
12. How a ClipsLed can be mounted on rigid surfaces like wall, pvc or wooden displays?
Female part of the snap can be also fixed by screws. Screw come with the product packages. |
